Function Of Safety Power Window: Notes

When driver door power window auto-up switch is operated, safety function is activated.

1. Safety function condition

   When detect the force of 100N (using the 10N/mm spring) during the window rising, window is reversed.

2. Length of window reversing (except holding the auto-up switch)
   • When detect the jamming during the 4mm ~ 250mm from top of the door.

     → Window is reversed until 300mm from top of the door.

     Fig 1: Checking Length Of Window Reversing (300MM)

     Courtesy of KIA MOTORS AMERICA, INC.
   • When detect the jamming over the 250mm from top of the door.

     → Window is reversed until 20mm from jamming position.

   Fig 2: Checking Length Of Window Reversing (50MM)

   Courtesy of KIA MOTORS AMERICA, INC.
3. Length of window reversing (holding the auto-up switch)
   • When detect the jamming during holding the auto-up switch.

     → Window is reverse until 25mm from jamming position.

   • Auto-up function is not available during the 5 seconds from above condition.

     → When holding the auto-up switch, window is operated as a manual-up function. (Safety function is not activated.)

   • When holding the auto-up switch after 5 seconds from above condition.

     → Window is reverse until 25mm from jamming position.

   Fig 3: Checking Length Of Window Reversing (25MM)

   Courtesy of KIA MOTORS AMERICA, INC.
4. Safety function is not available area

   Safety function is not available during the 4mm from top of the door.