Power Window Main Switch Inspection

Disconnect the negative (-) battery terminal.
Remove the front door trim.
(Refer to Body - "FRONT DOOR TRIM ")
Disconnect the connector from the power window switch module.

Fig 1: Disconnecting Connector From Power Window Switch Module
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to the table.
[Driver/Passenger Safety]

Fig 2: Driver/Passenger Safety Connector Terminals Continuity Chart (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Driver/Passenger Safety Connector Terminals Continuity Chart (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

[Driver Auto Down]

Fig 4: Driver Auto Down Connector Terminals Continuity Chart (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Driver Auto Down Connector Terminals Continuity Chart (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.
Remove the power window switch (A) after loosening the screws.

Fig 6: Removing Power Window Switch Screws

Courtesy of KIA MOTORS AMERICA, INC.