LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Release the residual pressure in fuel line (Refer to the Fuel Delivery System-Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").
  3. Remove the Alternator.

    (Refer to Engine Electrical System - "ALTERNATOR ")

  4. Disconnect the rail pressure sensor connector (A), and then remove the sensor (B) from the delivery pipe.
    Fig 1: Locating Rail Pressure Sensor And Connector
    G12227277Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals