Repair Procedures: Inspection
- Connect the KDS on the Data Link Connector (DLC).
- Measure the output voltage of the MAPS during idle with IG ON.
| Pressure [kPa (kgf/cm2 , psi)] | Output Voltage (Vref = 5V) |
|---|---|
| 20 (0.20, 2.90) | 0.5 |
| 40 (0.40, 5.80) | 0.79 |
| 80 (0.81, 11.60) | 1.36 |
| 120 (1.22, 17.40) | 1.93 |
| 160 (1.63, 23.20) | 2.5 |
| 200 (2.03, 29.00) | 3.07 |
| 220 (2.24, 31.90) | 3.36 |
| 240 (2.44, 34.80) | 3.64 |
| 280 (2.85, 40.61) | 4.21 |
| 300 (3.05, 43.51) | 4.5 |