Repair Procedures: Removal

Remove the floor console assembly.
(Refer to Body - "FLOOR CONSOLE ASSEMBLY ")
Loosen the mounting bolt (A) from the lower side of floor console assembly.
Tightening torque:

8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.
Loosen the E-shifter mounting bolts (A) and screws (B).
Tightening torque:

8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the E-shifter after disconnecting the connector.
1. E-shifter connector
2. Drive mode switch connector
3. AVN keyboard assembly connector
4. Wiring fixing clip
Courtesy of KIA MOTORS AMERICA, INC.
Remove the AVN keyboard assembly (A) after loosening the mounting screws.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the drive mode switch (A) after loosening the mounting screws.

Courtesy of KIA MOTORS AMERICA, INC.