LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Rio LX >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Shift Cable >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Place the shift lever in the "N" position.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - " AIR CLEANER  ") 

  3. Remove the battery and battery tray.

    (Refer to Engine Electrical System - " BATTERY  ") 

  4. Remove the shift cable (B) from the bracket after loosening a nut (A).
    G12576942Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the knob (A) by pulling it in the direction of arrow after removing the boots from the console upper cover.
    G12576943Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the floor console assembly.

    (Refer to Body - " FLOOR CONSOLE ASSEMBLY  ") 

  7. Remove the shift cable from the shift lever pin after removing the snap pin (A).
    G12576944Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the cable socket (A) from the shift lever.
    G12576945Courtesy of KIA MOTORS AMERICA, INC.
  9. Remove the shift cable retainer (A) after loosening the nuts (B). Then, remove the shift cable by pulling it toward the vehicle interior.
    G12576946Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals