LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the engine coolant temperature sensor connector (A).
    Fig 1: Locating Engine Coolant Temperature Sensor Connector
    G12227241Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the ignition coil connector (A) and CMPS connector (B).
  4. Unfasten the harness bracket (C) and Make a gap for removing high pressure fuel pipe by moving the bracket (C).
    Fig 2: Locating Ignition Coil Connector, CMPS Connector And Harness Bracket
    G12227242Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the vacuum pipe mounting bolts (A).
  6. Remove the engine coolant temperature sensor (B).
    Fig 3: Locating Vacuum Pipe Mounting Bolts And Engine Coolant Temperature Sensor
    G12227243Courtesy of KIA MOTORS AMERICA, INC.
  7. Fill with engine coolant.

    (Refer to Engine Mechanical System - "COOLANT ")

scientia non olet · About LEMON Manuals