Repair Procedures: Removal

Shift the gear to "N".
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Disconnect the inhibitor switch connector (A) and loosen the shift cable mounting nut (B).

Fig 1: Locating Inhibitor Switch Connector And Shift Cable Mounting Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the manual control lever (B) and the washer after removing a nut (A).

Fig 2: Locating Manual Control Lever And Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the inhibitor switch (A) after loosening the bolts (B).

Fig 3: Locating Inhibitor Switch And Bolts
Courtesy of KIA MOTORS AMERICA, INC.