LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2020 >> Cadenza Technology >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Shift Cable >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Shift the gear to "N".
  2. Remove the air cleaner assembly and air duct.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  4. Remove the shift cable (B) from the bracket after loosening a nut (A).
    G13403669Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the knob & boots (A) by pulling it in the direction of arrow after removing the boots from the console upper cover.
    G13403670Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the floor console assembly.

    (Refer to Body - "FLOOR CONSOLE ")

  7. Remove the shift cable (A) after separating the snap pin.
    G13403671Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the SRS Control Module (SRSCM).

    (Refer to Restraint - "SRS CONTROL MODULE ")

  9. Remove the shift cable retainer (A) after loosening the nuts. Then, remove the shift cable by pulling it toward the vehicle interior.
    G13403672Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals