LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2020 >> K900 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Replacement >> [Bank 1/Intake]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[Bank 1/Intake]

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the variable force solenoid (VFS).

    (Refer to Engine Control System - "VARIABLE FORCE SOLENOID (VFS) ")

  3. Remove the cylinder head cover.

    (Refer to Engine Mechanical System - "CYLINDER HEAD COVER ")

  4. Remove the installation nut (A), and then remove the cvvt oil control valve from the engine.
    G13143387Courtesy of KIA MOTORS AMERICA, INC.
  5. Install in the reverse order of removal.
NOTE:
  • Install the component to the specified torque.
  • Note that internal damage may occur if the component drops. In this case, inspect it before installation.
  • Apply the engine oil to the valve O-ring.
  • Exactly distinguish the color of the valve and harness connectors in banks 1 and 2 when installing, or the engine will operate abnormally (Refer to the table below).
scientia non olet · About LEMON Manuals