Repair Procedures: Installation
NOTE:
- Install the component with the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
- When cleaning the throttle body, clean the valve and carbon at the bore with the cloth wetted by cleaner.
- Do not spray the engine cleaner on the throttle body.
- Be careful that fingers or cloth are not caught in the valve.
- When installing the throttle body, be careful not to get foreign material into the throttle body.
- Install in the reverse order of removal.
Electronic Throttle Control Module Mounting Bolt:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)