Repair Procedures: Replacement: Notes
- Turn ignition switch OFF and disconnect the battery negative (-) terminal.
- Remove the battery.
(Refer to "Engine Electrical System" - BATTERY ")
- Remove the air cleaner.
(Refer to Engine Mechanical System - "AIR CLEANER ")
- Remove the battery tray.
(Refer to "Engine Electrical System" - BATTERY ")
- Disconnect the ECM Connector (A).
- Remove ECM bracket assembly (B) after loosening the mounting bolts and nut.
ECM Bracket Mounting Bolt/Nut:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)
- Remove the ECM after loosening the mounting nuts (A).
ECM Mounting Nut:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)