Repair Procedures: Installation

WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

To install reverse the removal procedure.

NOTE:

Before installing, check that the shift lever and Manual Control Lever are placed in the "N" position.

CAUTION:

Before installing, check that the shift lever and Manual Control Lever are placed in the "N" position When assembling shift cable, the projection must face upwards.

Courtesy of HYUNDAI MOTOR AMERICA

When assembling the snap pin, be careful about the correct direction.

Courtesy of HYUNDAI MOTOR AMERICA