ECM Neutral Mode Procedure (With Immobilizer)

After replacing the ECM of the vehicle with the immobilizer, the following procedure must be performed.
[If Installing a Used ECM]

Perform "ECM Neutral Mode" procedure using KDS.
(Refer to "Immobilizer System - REPAIR PROCEDURES ")
After finishing "ECM Neutral Mode", perform "Key Teaching" procedure using KDS.
(Refer to "Immobilizer System - REPAIR PROCEDURES ")

[If installing a new ECM]

Perform "Key Teaching" procedure using KDS.

(Refer to "Immobilizer System - REPAIR PROCEDURES ")