Repair Procedures: Installation
- Install in the reverse order of removal.
Spark Plug:
14.7 - 24.5 N.m (1.5 - 2.5 kgf.m, 10.8 - 18.0 lb.ft)
NOTE:
- Install the ignition coil with the specified torque.
- If ignition coil is dropped, it may cause internal damage. Do not use it.
- When assembling the parts, clean the contaminated area
.
- The cloth should be clean, free of contaminants, and soft enough to not damage the parts.
(When replacing ignition coil and spark plug together, cleaning is not required.)