Repair Procedures: Inspection
- Turn the ignition switch OFF.
- Disconnect the HO2S connector.
- Measure resistance between the HO2S terminals 2 and 5 [B1/S1].
Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
- Check that the resistance is within the specification.
Specification:
Bank 1/Sensor 1: 2.4 - 4.0 Ω [20°C (68°F)]
Bank 1/Sensor 2: Approx 9.0 Ω [20°C (68°F)]