Repair Procedures: Installation
WARNING: This page is about a different variant/trim than selected.
- Install in the reverse order of removal.
NOTE:
- Before mounting, replace the parking rod cam if there are excessive flaws on the outside of the parking rod cam (A).
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Make sure that there is an O-rings (A) on the side of the case.
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Apply sealant on the IVT case side (A).
Standard sealant :
Bead diameter :
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Check the IVTF level after refilling the IVT with fluid.
(Refer to Transmission Gear Oil - "Replacement")