Repair Procedures: Cleaning
- Remove the ETC.
(Refer to " REMOVAL ")
NOTE: Cleaning the ETC after removing it. - Clean the pollutant in the throttle body using a soft cloth moistened with throttle cleaning fluid.NOTE:
- Be careful not to let foreign matter inside of ETC.
- Do not spray cleaning fluid to ETC directly and use a lint free cloth moistened with throttle cleaning fluid.
- Be careful as fingers or cloth may get caught in the valve.
- Install the ETC.
(Refer to " INSTALLATION ")
- Reset the ECM adaptive values after replacing the ETC.
- Perform the ETC learning procedure.
(Refer to " ADJUSTMENT ")