Repair Procedures: Inspection
- Switch "OFF" the ignition.
- Disconnect the OTS connector.
- Remove the OTS.
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 2.
- Check that the resistance is within the specification.
Temperature Resistance (kΩ) °C °F -40 -40 41.74 - 54.54 -20 -4 14.13 - 16.83 0 32 5.28 - 6.3 25 77 1.88 - 2.14 80 176 0.31 - 0.33 140 284 0.07 - 0.08