Repair Procedures: Removal
- Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
- Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
- Disconnect the ETC Module connector (A).
- Disconnect the coolant hoses (B).
- Remove the ETC module (D) after loosening the mounting bolts (C).
Electronic throttle body mounting bolt:
14.7 - 24.5 N.m (1.5 - 2.5 kgf.m, 10.8 - 18.1 lb.ft)