Camber And Caster
Camber and Caster are pre-set at the factory, so they do not need to be adjusted. If the camber and caster are not within the standard value, replace or repair the damaged parts and then inspect again.
Nu 2.0 MPI ATKINSON
- Camber angle: -0.5° ± 0.5 °
- Caster angle: 4.34° ± 0.5 °
Gamma 1.6 TGDI
- Camber angle: -0.57° ± 0.5 °
- Caster angle: 4.29° ± 0.5 °