Repair Procedures: Inspection
- Turn the ignition switch OFF.
- Disconnect the ATS connector.
- Measure resistance between the ATS terminals 1 and 2.
- Check that the resistance is within the specification.
| Temperature[°C(°F)] | Resistance(kΩ) |
|---|---|
| -40(-40) | 811.1 - 956.8 |
| -20(-4) | 255.6 - 287.7 |
| 0(32) | 91.5 - 98.8 |
| 20(68) | 36.6 - 38.0 |
| 30(86) | 23.8 - 24.7 |
| 40(104) | 15.7 - 16.6 |
| 50(122) | 10.6 - 11.3 |
| 60(140) | 7.2 - 7.9 |
| 80(176) | 3.6 - 4.0 |