LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2021 >> Telluride EX, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Injector >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don't do any repair work right after engine stops.
  1. Remove the delivery pipe & injector assembly.

    (Refer to Fuel Delivery System - "DELIVERY PIPE ")

  2. Disconnect the injector connector (A).
    G13310064Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the injector in the direction of arrow (B) by pressing the pin (A).
    G13310065Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: If the injector adheres to the cylinder head, remove it by using the (09351-D2100).
    G13310066Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals