Repair Procedures: Installation

NOTE:

For the vehicle equipped with a battery sensor, be careful not to damage the battery sensor when replacing or recharging the battery.
When replacing the battery, a battery of the same type, capacity and brand as the previously installed battery should be used. If the vehicle is replaced with a battery of a different type, the battery sensor may recognize it as abnormal.
When installing the battery, fix the mounting bracket on the tray correctly.
When installing the ground cable on the negative post of battery, tighten the clamp to the specified torque. Excessive tightening can damage the PCB internal circuit and the battery terminal.
After disconnecting then reconnecting the battery negative cable, reset some parts that require the reset procedures.
(Refer to Body Electrical System - "GENERAL INFORMATION ")