Repair Procedures: Installation
- Install in the reverse order of removal.
Spark Plug:
14.7 - 24.5 N.m (1.5 - 2.5 kgf.m, 10.8 - 18.0 lb.ft)
NOTE:
- Install the spark plug with the specified torque.
- Be careful not to damage external electrode when installing the spark plug.
- When assembling the parts, clean the contaminated area (A) with the cloth.
- The cloth should be clean, free of contaminants, and soft enough to not damage the parts.
(When replacing ignition coil and spark plug together, cleaning is not required.)