BES System State Chart
System STATES in LEARNT MODE
In learnt mode, the BES System can be set in 6 different sates, depending on the status of the terminals, ESCL and Engine status:
| System State | Terminal Status | ESCL Status | Engine status |
|---|---|---|---|
| 1. OFF - Locked | OFF | Locked | Stopped |
| 2. OFF - Unlocked | OFF | Unlocked | Stopped |
| 3. ACC | ACC | Unlocked | Stopped |
| 4. IGN | IGN1, IGN2, ACC | Unlocked | Stopped |
| 5. Start | IGN1, Start | Unlocked | Cranking |
| 6. IGN - Engine | IGN1, IGN2, ACC | Unlocked | Running (means "self-running") |
Referring to the terminals, the system states described in the table above are same as those one found in a system based on a mechanical ignition switch. The one of distinction with Mechanical-Ignition-Switch based system is that the BES system allows specific transition from [OFF] to [START] without going through [ACC] and [IGN] states.