Repair Procedures: Inspection
Information
Inspect the connector thoroughly for looseness, poor connection, bending, corrosion, contamination, deformation, or damage.
- Disconnect the parking switch connector.
- Turn Ignition "ON", & engine "OFF".
- Measure the output signal in each range (P, R, N, D).
SIGNAL CODE SPECIFICATION
| Signal | P | R | N | D |
|---|---|---|---|---|
| S1 | 18.3% | 47.5 % | 64.6 % | 81.7 % |
| S2 | 81.7 % | 52.5 % | 35.4 % | 18.3% |
PIN - CONNECTION SPECIFICATION
| Pin | Connection information |
|---|---|
| 1 | Power (Ps, Ns) |
| 2 | Back-up lamp |
| 3 | Power (Back-up lamp) |
| 4 | Ps, Ns |
| 5 | Power (5V) |
| 6 | Ground (5V) |
| 7 | S1 |
| 8 | S2 |