Removal & Installation: Removal

Disconnect the battery negative (-) terminal.
Remove the air cleaner.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Disconnect the Electronic Throttle Control (ETC) module connector (A).

Courtesy of KIA MOTORS AMERICA, INC.
Separate the engine wiring protector (A) after removing the mounting bolt and releasing the clip.
Tightening Torque:

8.8 - 10.8 N.m (0.9 - 1.1 kgf.m, 6.5 - 8.0 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.
Remove the surge tank stay (A) after removing the mounting bolts.
Tightening Torque:

18.6 - 23.5 N.m (1.9 - 2.4 kgf.m, 13.7 - 17.4 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.
Remove the ETC module (A) after removing the mounting bolts.
Tightening Torque:

8.8 - 10.8 N.m (0.9 - 1.1 kgf.m, 6.5 - 8.0 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.