Removal And Installation: Notes

WARNING:

When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
When working on the high voltage system or related components, be sure to observe and be aware of the "HIGH VOLTAGE SYSTEM GENERAL SAFETY INFORMATION AND CAUTION ". If not, it may cause serious accidents due to electric shock or short circuit.
When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.

Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Disconnect the Camshaft Position Sensor (CMPS) connector (A).
Intake

Courtesy of KIA MOTORS AMERICA, INC.

Exhaust

Courtesy of KIA MOTORS AMERICA, INC.
Remove the CMPS (A) after removing the bolt.
Tightening torque:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Intake

Courtesy of KIA MOTORS AMERICA, INC.

Exhaust

Courtesy of KIA MOTORS AMERICA, INC.