On Vehicle Inspection: Notes
- The engine control system can be more quickly diagnosed for problems by using the KDS (Refer to
"DTC guide").
- Self diagnosis: Inspect the Diagnostic Trouble Code (DTC) using the KDS
(Refer to DTC guide when fault code is found.)
- Data analysis: Checking the system input/output data state
(Data Analysis → System Selection → Engine)
Throttle Angle (°) Output Voltage (V) TPS 1 TPS 2 0 0.50 4.50 10 0.96 4.05 20 1.41 3.59 30 1.87 3.14 40 2.32 2.68 50 2.78 2.23 60 3.23 1.77 70 3.69 1.32 80 4.14 0.86 90 4.60 0.41 (1)E.C.P (0°) 0.50 4.50 (2)W.O.T (82°) 4.28 0.72 (1) Electrically Close Position (2) Wide Open Throttle - Actuation test: Checking the system operation condition
(Data Analysis → System Selection → Engine → Actuation test → ETC Motor)
Information
Refer to the KDS screen for operating conditions and details.
- Self diagnosis: Inspect the Diagnostic Trouble Code (DTC) using the KDS