Removal and Installation: Installation
WARNING:
- When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
- When working on the high voltage system or related components, be sure to observe and be aware of the "HIGH VOLTAGE SYSTEM GENERAL SAFETY INFORMATION AND CAUTION ". If not, it may cause serious accidents due to electric shock or short circuit.
- When working on the high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure.
- Install in the reverse order of removal.NOTE:
- Install the Engine Control Module (ECM) to the specified torque.
- If the ECM is dropped, it may cause internal damage. (Do not reuse)
- ECM should be performed the reset and learning procedure after replacing it with a new one.
(Refer to Engine Control Module (ECM) - "ADJUSTMENT ")