LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2024 >> Telluride EX X-Line >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Tires/Wheels/Alignment >> Alignment >> Adjustment >> Front Wheel Alignment >> Camber And Caster
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camber And Caster

Camber and Caster are pre-set at the factory, so they do not need to be adjusted. If the camber and caster are not within the standard value, replace or repair the damaged parts and then inspect again.

Camber angle  :-0.5° ± 0.5°

Caster angle:  4.26° ± 0.5°

NOTE:
  • The worn loose or damaged parts of the front suspension assembly must be replaced prior to measuring front wheel alignment.
  • Caster are pre-set to the specified value at the factory and don't need to be adjusted.
  • If the caster are not within specifications, replace bent or damaged parts.
  • The difference of left and right wheels about the caster must be within the range of 0° ± 0.5°.
scientia non olet · About LEMON Manuals