Description & Operation
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
When the starter inhibit/reverse light switch (X167) is in P or N, ground is applied to the starter solenoid relay (K137). Putting the ignition switch (X134) in position III applies battery voltage to the starter solenoid relay via the starter relay diode (Z158). The starter (M134) energizes and applies battery voltage to the starter solenoid (K136). The starter solenoid applies battery voltage to the starter.