Body Control Unit: Description: General

The Body Control Unit (BCU) is located behind the passenger glovebox and is connected to the main harness by four connectors on its bottom edge and an additional connector located on the side of the BCU casing. Mounting the BCU behind the fascia makes it reasonably inaccessible for intruders to disable the anti-theft system.

The BCU uses solid-state microprocessor control to perform logical operations and timing functions for a variety of the vehicle's electrically operated systems, these include:

• Door locking.
• Anti-theft alarm and immobilization system.
• Exterior lighting including direction indicators and hazard warning lamps.
• Courtesy lighting.
• Wipers and washers.
• Electric windows and sunroof.
• Heated windows.

The BCU also communicates with several other electronically controlled systems such as the EAT ECU and SLABS ECU and also has a datalink between the Intelligent Driver Module (IDM) and the instrument pack. The datalink is a low speed bus capable of transmitting and receiving messages at a data rate of 10,400 bits per second. Additional inputs and outputs to peripheral devices are included which are necessary for determining vehicle status for particular logical operations e.g. crank, ignition key inserted, fuel flap enable etc.

The BCU receives its power supply from the engine compartment fuse box, and is protected by a 10 A fuse.

The BCU communicates with the IDM to provide the control signals to perform power switching operations in conjunction with dedicated relays.