IDM outputs
The IDM receives the following signals from the BCU using the serial datalink to provide power outputs:
SIGNAL DESCRIPTION
| Description | Signal type | System |
|---|---|---|
| Unlock all doors enable | Digital | Locking/ Unlocking/ Alarm |
| Lock passenger and rear doors enable | Digital | Locking/ Unlocking/ Alarm |
| Superlock all doors enable | Digital | Locking/ Unlocking/ Alarm |
| Lock driver's door | Digital | Locking/ Unlocking/ Alarm |
| Rear fog lamps enable | Digital | Exterior lighting |
| Daylight running lamps enable | Digital | Exterior lighting |
| LH direction indicators enable | Digital | Direction indicators/ Hazard warning/ Alarm |
| RH direction indicators enable | Digital | Direction indicators/ Hazard warning/ Alarm |
| Gear position indicator illumination | Digital | Illumination |
| Headlamp main beam indicator disable | Digital | Illumination |
| Front wiper enable | Digital | Wipers and washers |
| Rear wiper enable | Digital | Wipers and washers |
| Rear window enable | Digital | Power windows |
| Shift lever solenoid enable | Digital | Automatic gearbox |
| Transfer box solenoid enable/ Alarm sounder relay | Digital | Gearbox |
| Heated rear window enable | Digital | Heated screens |