Jacking & Hoisting: Notes
CAUTION:
Manufacturer does not recommend use of single or 2-post hoists with 4 adjustable support arms. The manufacturer does not consider these hoist designs safe for lifting Land Rover vehicles. Vehicle can only be raised and supported by axles or chassis. DO NOT position jack or safety stands under any part of the body or bumpers, radius arms, steering linkage, anti-sway bar, torsion rod, rear trailing links, or any engine or drive train component. Always check vehicle stability before beginning repairs.
NOTE:
Before lifting vehicle, ensure that the air suspension system is set to standard or high position and disabled (remove key from ignition switch, and open and close any door).