Upper Steering Column: Installation
- Position steering column in vehicle and engage pedal box studs. Install steering column mounting bolts at firewall and tighten to 18 ft. lbs. (24 N.m). Install steering column mounting nuts at pedal box and tighten to 18 ft. lbs. (24 N.m). Install steering column mounting bolts at pedal box and tighten to 18 ft. lbs. (24 N.m). Install blower motor duct.
- Connect column connectors, ignition lock barrel illumination light and secure harness clips. Connect air bag system and washer/wiper switches to combination switch connector. Install upper and lower steering column covers. Connect courtesy light and install lower instrument panel. Install intermediate shaft. See INTERMEDIATE SHAFT . Connect battery positive cable, then negative battery cable.