96.10.04 Drive Cycle 'D': Check
- Turn ignition key to position II for 30 seconds.
- Connect T4 to vehicle.
- Follow on screen prompts and check for engine management fault codes.
- Ensure engine coolant temperature is below 35 degrees C.
- Start engine and allow to idle for 2 minutes.
- Carry out a road test and perform the following operations.
- Carry out 2 light accelerations from zero to 35 mph using light throttle pedal pressure.
- Carry out 2 medium accelerations from zero to 45 mph using moderate throttle pedal pressure.
- Carry out 2 hard accelerations from zero to 55 mph using heavy throttle pedal pressure.
- Accelerate to 60 mph and cruise for 5 minutes.
- Decelerate to 50 mph and cruise for 5 minutes.
- Decelerate to 35 mph and cruise for 5 minutes.
- Road test is now complete.
- Allow engine to idle for 2 minutes.
- Connect T4 to vehicle.
- Follow on screen prompts and check for engine management fault codes.
- Disconnect T4 from the vehicle.