96.10.06 Drive Cycle 'F': Check
- Turn ignition key to position II for 30 seconds.
- Ensure engine coolant temperature is below 60 degrees C (140 degrees F)
- Ensure vehicle is in high range.
- Start engine and allow to idle for 2 minutes.
- Carry out a road test and perform the following operations.
- Accelerate to 50 mph and cruise for 2 minutes.
- Allow engine to idle for 2 minutes.
- Select low range.
- Allow engine to idle for 2 minutes.
- Carry out 2 light accelerations from zero to 10 mph using light throttle pressure.
- Carry out 2 medium accelerations from zero to 20 mph with moderate throttle pedal pressure.
- Accelerate to 30 mph and cruise for 2 minutes.
- Select high range.
- Accelerate to 50 mph and cruise for 2 minutes.
- Road test is now complete.
- Allow engine to idle for 2 minutes.
- Connect T4 to vehicle.
- Follow on screen prompts and check for engine management fault codes.
- Disconnect T4 from the vehicle.