Filler Neck: Installation
- Fit 2 nuts securing fuel tank filler neck to body, connect breather hose to fuel tank filler neck and secure with clip.
- Fit 3 cable ties securing air suspension pipes to fuel tank filler neck.
- Connect fuel tank filler hose to fuel tank filler neck.
- Fit securing clip to fuel tank breather hose and charcoal canister vent pipe.
- Fit fuel tank breather pipes and charcoal canister vent pipes to clip on fuel tank filler neck.
- Fit bolts and nuts securing RH fuel tank shield and tighten to 25 Nm (18 ft. lbs).
- Fit RH rear wheel arch liner. See 76.10.49 LINER -- REAR WHEEL ARCH -- SINGLE .
- Fit propeller shaft. See REAR DRIVE SHAFT .
- Refill fuel tank with extracted fuel. See TANK - DRAIN .
- Connect battery earth lead.