In-Vehicle Temperature Sensor: Installation
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Install the in-vehicle temperature sensor.
- Connect the hose.
- Connect the electrical connector.
- Secure the clips.
- Install the steering column gaiter panel.
- Secure with the clips.
- Tighten the Torx screws.
- Install the instrument panel center finisher.
- Install the audio unit bezel.
- Install the center console upper finisher trim.
- Install the steering column shrouds.
- Install the instrument panel access panel.