Navigation System Antenna: Installation
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the adhesive contact area.
- Install the antenna.
- Connect and secure the electrical connector.
- Tighten the screw.
- Install the liftgate upper trim panel.
- Secure the clips.
- Install the high mounted stoplamp. Refer to High Mounted Stoplamp .
- Connect the battery ground cable. Refer to Specifications .