Navigation System Traffic Amplifier: Installation
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Install the navigation system traffic amplifier.
- Secure the clip.
- Tighten the Torx bolt to 10 Nm (7 lb.ft).
- Connect the electrical connector.
- Connect the antenna cables.
- Install the liftgate upper trim panel.
- Secure with the clips.