LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls >> Electronic Engine Controls - V8 5.0L Petrol >> General Procedures >> Brake Pedal Position (BPP) Switch Adjustment >> Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Pedal Position (BPP) Switch Adjustment: Check

  1. Remove the brake pedal rubber.
    2. NOTE: Make sure that the dial test indicator (DTI) gauge is in line with the brake pedal movement.
  2. Position the DTI gauge on a suitable mounting block, as illustrated.
    GJ0014405
  3. With the aid of another technician, gently press the brake pedal until the stoplamps illuminate.
    4. NOTE: The specification is that the stoplamps should illuminate at between 5.5mm and 8.5mm brake pedal travel.
  4. Note the measurement of the brake pedal travel from rest position until the stoplamps illuminated.
scientia non olet · About LEMON Manuals