LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2013 >> LR4 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls >> Electronic Engine Controls - V8 5.0L Petrol >> Description And Operation >> Electronic Engine Controls >> Manifold Absolute Pressure Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manifold Absolute Pressure Sensor

GJ0013078Courtesy of JAGUAR CARS, INC.

The manifold absolute pressure (MAP) sensor allows the engine control module (ECM) to calculate the load on the engine, which is used in the calculation of fuel injection time.

The manifold absolute pressure (MAP) sensor is installed in the air inlet of the intake manifold. The sensor is secured with a single screw and sealed with an O-ring. A three pin electrical connector provides the interface with the engine harness.

If the manifold absolute pressure (MAP) sensor fails, the engine control module (ECM) adopts a default value of 1 bar (14.5 lbf/in.2 ).

With a failed manifold absolute pressure (MAP) sensor, the engine will suffer from poor starting, rough running and poor driveability.

scientia non olet · About LEMON Manuals