DTC U3000-54: Control Module - Missing calibration: Action
- Check the following criteria have all been achieved:
- Ignition status set to RUN/START
- Verify seat is always empty after power-up before re-zero is requested
- The occupant classification sensor control module has gone through the seat assembly plant calibration
- No collision event received from the restraints control module during the current ignition cycle
- No faults present in the current ignition cycle
- The trigger message for calibrate empty seat offset has been received from the diagnostic tool
- Occupant classification sensor control module has enough time to begin classification
- Temperature is between 6°C (42°F) and 36°C (97°F)