DTC U201A-57: Control Module Main Calibration Data - Invalid/incomplete software component: Action
NOTE:
After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the Diagnostic Trouble Code(s)
- Using the Jaguar Land Rover approved diagnostic equipment, reconfigure the restraints control module with the latest level software and calibration
- Using the Jaguar Land Rover approved diagnostic equipment, check and update the Car Configuration File (CCF) as required. Perform routine - Allow Central Configuration Data Learning (0x0E06). Clear the Diagnostic Trouble Code(s) and retest
- Check if the gateway module is broadcasting the correct car configuration file. Check the gateway module for car configuration file related Diagnostic Trouble Code(s) and refer to the relevant DTC index