DTC U3000-06: Control Module - Algorithm based failure: Action

NOTE:

Do Not replace the image processing module A for this DTC alone
It is recommended to use a guided diagnostic (if available) to assist in the correct diagnosis of this DTC by using the Jaguar Land Rover approved diagnostic equipment

Check the image processing module A is securely mounted in the correct position, For additional information, Refer to: IMAGE PROCESSING MODULE A . Rectify as required
Using the Jaguar Land Rover approved diagnostic equipment, reconfigure the image processing module with the latest level software
Using the Jaguar Land Rover approved diagnostic equipment, run the routine - Camera Calibration
After successful calibration, perform a road test for a minimum of 10 minutes at speeds greater than 30km/h
Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest
If the fault persists, contact Jaguar Land Rover technical assistance