No-Load Test

Using jumper wires, connect starter terminal "C", terminal No. 30 and terminal No. 50 to battery. See Fig 1. Under no-load test, starter armature should rotate steadily. See NO-LOAD TEST SPECIFICATIONS table.

NO-LOAD TEST SPECIFICATIONS

Application	Maximum Amps & Minimum RPM	Volts
ES300	90 @ 3000	11.5
LS400	120 @ 4000	11.5
SC300	120 @ 3300	11.5
SC400	90 @ 3500	11.5

Fig 1: Performing Starter Bench Tests

Fig 2: Performing Starter Bench Tests