Passenger's Switch Test
Remove power window master switch. See WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance of switch terminals with switch in indicated positions. If continuity is not as specified, replace switch. See Fig 1. See appropriate POWER WINDOW PASSENGER SWITCH CONTINUITY TEST table.
POWER WINDOW PASSENGER SWITCH CONTINUITY TEST
| Position | Terminal Continuity |
|---|---|
| Off | 1 & 3; 2 & 4 |
| Up | 1 & 3; 2 & 5 |
| Down | 2 & 4; 3 & 5 |